When it comes to purchasing fire and smoke detectors for your home, you need to know where exactly to install them. This is even if the range of the detection for either device is very wide. You still need to place the fire and smoke detectors in places where fires are likely to occur. This will help your household respond to fires immediately and effectively.
This guide will help you determine which spots in your home are the most fire-prone areas. That way, you can maximise the installation of your smoke and fire detectors. Think of this as a way to effectively disaster-proof your home and protect your family.
1. Get to know your smoke and fire detectors
One of the most common mistakes that homeowners make is buying any popular smoke and fire detector as if they all function the same. But this is not the case. In fact, smoke detectors and fire detectors are different since they may be designed to detect a specified amount of smoke or heat.
Be sure to read the product description or manuals of the detectors you purchase. You can also talk to a professional electrician to discuss the most appropriate smoke or fire detectors for your household. This will allow you to effectively track any fire or smoke and prevent further damages.
2. Take note of the detectors? power source
Different types of smoke and fire detectors also run on different power sources. For instance, battery-run detectors are popular units that you may have come across. They are usually cheaper and therefore not as high-quality as the ones that run on electricity.
Research the different kinds of detectors and take note of their power sources. Pay attention to the device’s life cycle when installed with a battery or plugged in. This will help you better determine what kind of device you need for which part of your home. You can decide between a more convenient and easily removable detector or a semi-permanent and electricity-powered one.
3. Inspect for fire-prone areas in your home
To fully maximise your spending and installation of smoke and fire detectors, you need to place them in fire-prone areas. This means where fire can possibly ignite by accident. Common places in the home include your home kitchen, near your outdoor grill, and your water heating system. However, you may need to install detectors in other places as well.
As it’s better to be safe than sorry, consider putting fire and smoke detectors where you commonly are in the home, like the living room or bedroom. There may, at times, be fires that instantly spark there, like certain appliances suddenly lighting up. Pay attention to the small things in your home that can suddenly combust when left unattended.
4. Hire the professional help of electrical contractors
Installing smoke and fire detectors in your home is no guarantee that they will detect fires effectively. This could be due to the improper positioning of your detectors within the recommended angle and height. There may even be instances where the detectors are too close to the smoke or open flame, leading to a fake alarm.
For truly professional and cost-effective fire or smoke detector installation, hire experienced electricians to get the job done. You can even ask them which particular models your home needs to make more precise preventive measures. Having them install and recommend fire detection solutions will secure your home and wellbeing.
For your first line of prevention and swift detection of fires and smoke in your home, commit to following the previously mentioned tips to effectively safeguard your belongings and family today.
Are you in need of professional smoke detector installation and other related electrical services in Gold Coast? We at Reefcosa Electrical are equipped to serve you. We have plenty of experience in all things electrical for your residential, commercial, and industrial needs. Contact us today to book a job or request a quote.